Temasilox - Higher UV-resistance than with conventional topcoats

Temasilox -  Higher UV-resistance than with conventional topcoats

    Temasilox

    Temasilox

    A high performance, isocyanate free two-component, high-solids and high-gloss polysiloxane topcoat with excellent color and gloss retention.

    Temasilox - Excellent anticorrosive properties

    Excellent anti-corrosive properties

    The anti-corrosive properties of Temasilox are outstanding. The product can be used as a single-coat paint or a topcoat. When applied in a two-coat system on zinc-rich primer, corrosivity class C5 can be achieved.

    Does not contain free isocyanates

    Temasilox is isocyanate free and does not, therefore, generate any di-isocyanates during cutting, welding or in a fire. The product promotes a healthier working environment and has less impact on the environment.

    Temasilox - Isocyanate-free topcoat
    Temasilox - Higher UV-resistance than with conventional topcoats

    High solids, VOC compliant

    As a high-solids, VOC-compliant product, Temasilox meets even the most stringent environmental demands. Using Temasilox instead of conventional topcoats will result in a remarkable reduction in solvent emissions.

    This product is mostly used for:

    Data Sheets

    Description A high performance, isocyanate free two-component, high-solids and high-gloss polysiloxane topcoat with excellent color and gloss retention.
    Features and uses • Excellent anticorrosive properties. When applied in two-coat system on zinc rich primer, corrosivity class C5 can be achieved. • Isocyanate free topcoat. Does not generate any di-isocyanates during cutting, welding or in a fire. • As a high-solids, VOC compliant product Temasilox meets even the most stringent environmental demands. • Higher UV-resistance than with conventional topcoats. • Offers significant savings with regard to maintenance costs. • Easy to apply on large surfaces due to long open time of the paint film. • No need for evaporation of solvents before ovening. • Rapidly ready for service. • The product is approved to be used as a topcoat in pre-qualified systems according to NORSOK M-501, system 1, rev.6. • Can also be used as a single-coat finish on blast cleaned or phosphated steel. On blast cleaned steel even corrosivity category C4 is possible. • Recommended to be used as an isocyanate free finishing coating for steel structures for bridges, tanks, pipes, buildings, power plants, offshore structures and other structures that require long durability in severe corrosive atmospheric areas.
    Volume Solids 87±2%

    Product data sheet and Safety data sheet
    Product Data Sheet
    Safety Data Sheet
    Safety Data Sheet
    Safety Data Sheet