Concrete floors in hospitals

Fontefloor EP Primer - Odorless priming lacquer

    Fontefloor EP Primer

    Fontefloor EP Primer

    A two-component water-borne epoxy primer.

    Floor coatings

    Universal primer

    Fontefloor EP Primer seals the concrete surface and provides adhesion to all Temafloor coatings and screeds, and Fontefloor paints. It can be also used for patching cracks and holes in concrete.

    Fast-drying varnish

    Fontefloor EP Primer dries in 6 hours for overcoating. This varnish is also used for priming of damp concrete with relative humidity over 97% prior to Fontefloor EP 100 epoxy paint.

    Floor coatings

    Water-borne paint system for concrete floor

    We offer environment- and user-friendly Fontefloor EP paint system for concrete floors, which consists only of the water-borne products. A significant advantage of this system is that you need only one hardener or the same EP Hardener can be used for all Fontefloor EP products.

    Replacing solvent-borne coatings with high-performance water-borne alternatives can offer many advantages:
    •Reduced solvent exposure and associated health risks
    •Fewer concerns with flammability and the impact on insurance costs
    •Easy soap-and-water clean-up
    •Less hazardous waste disposal and associated cost.

    Application instruction of Fontefloor EP water-borne coating system

    Prime the surface with 20–40 % thinned Fontefloor EP Primer or 0-30 % thinned Fontefloor EP 100 epoxy paint.

    Overcoating may be carried out 16-24 hour after priming by applying Fontefloor EP 100 thinned 0-30 % with water.

    Floor coatings

    Topcoating with varnish is done with unthinned or 5-10% thinned Fontefloor EP Clear.
    Anti-slipping performance of the varnish can be enhanced by adding Tikkurila anti-slip agent. Furthermore, design and mosaic floors can be created.

    This product is mostly used for:

    Data Sheets

    Description A two-component water-borne epoxy primer.
    Features and uses • Seals the concrete surface and confirms adhesion prior to Temafloor coatings and screeds and Fontefloor paints. • Suitable for priming of damp concrete (relative humidity of the concrete over 97%) surfaces prior to Fontefloor EP 100 epoxy paint. • Good water vapour permeability. • Can be used for patching cracks and holes in concrete. • The M1 classification for low-emitting building materials has been granted by the Finnish Building Information Foundation RTS. • Used for dust binding and priming of untreated concrete floors.
    Volume Solids approx. 66%

    Product data sheet and Safety data sheet
    Product Data Sheet
    Safety Data Sheet
    Declaration Of Performance