Fontecoat EP 50 provides protection comparable to that of solvent-borne epoxy paints.

Fontecoat EP 50 - Water-borne single-coat paint for low-VOC demands

    13938
    Fontecoat EP 50

    Fontecoat EP 50

    A two-component water-borne epoxy topcoat and a single-coat paint.

    Fontecoat EP 50 is a semi-gloss epoxy paint to be used as a single-coat paint, primer, intermediate coat or topcoat in epoxy or polyurethane systems for steel surfaces.

    Fast curing

    Fontecoat EP 50 is a semi-gloss epoxy paint to be used as a single-coat paint, primer, intermediate coat or topcoat in epoxy or polyurethane systems for steel surfaces. It dries rapidly and can be applied in thick layers.

    Environmentally friendly (low VOC emissions)

    Fontecoat EP 50 is an ideal option when a low VOC content is required. The paint has very good resistance against mechanical and chemical stress. The product provides protection comparable to that of solvent-borne epoxy paints.

    Fontecoat EP 50 is an ideal option when a low VOC content is required
    Fontecoat EP 50 - Environmentally friendly (low VOC emissions)

    Excellent adhesion and surface tolerance

    Fontecoat EP 50 can be primed with the solvent-borne adhesion primer Temakeep. The system has extremely good adhesion and surface tolerance. At the same time, it is possible to achieve a very rapid production cycle.

    This product is mostly used for:

    Data Sheets

    Description A two-component water-borne epoxy topcoat and a single-coat paint.
    Features and uses • Fast curing and environmentally friendly (low VOC). • Very good resistance against mechanical and chemical stress. • Excellent adhesion and surface tolerance when used with Temakeep adhesion primer, allowing extremely fast cycle times. • Used as a topcoat or as a single coat paint in epoxy paint systems for steel surfaces. • Can also be used as a primer or an intermediate coat in epoxy or polyurethane systems. • Resistant to diesel and biodiesel (RME) fuel. • The product has MED (Marine Equipment Directive) certificate no VTT-C-12360-15-18 and is thus accepted for painting surfaces inside the ships. • Recommended for framework, service platforms, conveyors and other steelwork, machinery and equipment.
    Volume Solids 47±2% (ISO 3233)

    Product data sheet and Safety data sheet
    Product Data Sheet
    Safety Data Sheet

    Metal Systems

    System Code Paint System Total DFT (µm) Corrosivity category/ Durability ISO or Other Standard Pretreatment

    TF27

    Fontecoat EP 50 160 C3
    M
    A3.08 Sa2½
    Steel surfaces in urban and industrial environment exposed to abrasion. E.g. framework and service platforms in factories.

    TF27

    Fontecoat EP 50 240 C4
    M
    A4.08 Sa2½
    Steel constructions, machines and equipment in pulp and paper industry exposed to severe splashes, chemical dust and abrasion.

    TF27

    Fontecoat EP 50 100 C2
    -
    - Sa2½
    Steel surfaces in cold indoor spaces in clean rural environment. E.g. framework and service platforms in factories.