Valtti Akvabase

    Valtti Akvabase

    The best primer for wood

    Valtti Akvabase is a modern, long-lasting, waterborne protective wood primer for untreated timber and board surfaces. The protection is absorbed into the wood and improves topcoat adhesion. Valtti Akvabase slows down the impact of blue stain and dry rot and helps the entire coating system to stay clean.

    • Product Warning Frost
    • Product Drying Time Paintable 24 h
    • Product Drying Time Non-stickable 0.5 h
    • Water soluble
    • 80% 5°C
    • Product Minimum Usage 4 l/m²
    • Product Maximum Usage 5 l/m²
    • Product Application Methods: Spraying
    Tikkurila Oyj image

    Is absorbed into wood

    Valtti Akvabase is absorbed into untreated timber or board surfaces just like the traditional Valtti Pohjuste (Primer).

    User-friendly

    Waterborne Valtti Akvabase is pleasant to use, and the tools are easy to clean with just soap and water even in the basic conditions at the summerhouse.

    Priming coat for wooden exterior
    Valtti products

    Use any coating you wish

    A wooden surface treated with protective Valtti Akvabase primer can be treated with any water- or solvent-borne stain or paint. It is essential to apply the topcoat as soon as possible after priming.

    Product data sheet

    Valtti Akvabase

    Description

    Waterborne priming oil for wood.

    Product features

    For protection and priming of timber and wooden structures before surface treatment. Suitable for sawn and planed timber, logs, thermally treated and impregnated wood in exterior use. Not to be used in interior surfaces. Not to be used on wood in direct contact with foodstuffs or animal nutrition. Use the product only as wood preservative as described in product data sheet and label. Use wood preservatives safely. Always read the label and product information before use. Finishing coats are recommended to be applied as soon as possible, because colourless priming oil does not protect the wood surface from the adverse effects of sunlight.

    Recommended uses

    All wooden structures to be treated with wood stains or paints (except surfaces to be treated with wood oils and barn-red paints) and exterior woodwork. Can be used on wood components above grounds. Not for use on wood in direct soil contact or in marine environment.

    Technical Information

    • Product Warning Frost
    • Product Drying Time Paintable 24 h
    • Product Drying Time Non-stickable 0.5 h
    • Water soluble
    • 80% 5°C
    • Product Minimum Usage 4 l/m²
    • Product Maximum Usage 5 l/m²
    • Product Application Methods: Spraying
    Coverage
    0.18-0.22 l/m²
    Medium
    Waterborne
    Storing And Transportation
    Protect from frost.
    Product data sheet and Safety data sheet