230
    Anti-Dust

    Anti-Dust

    • Product Drying Time Non-stickable 1 h
    • Product Intended Areas For Use: Floor IAW3
    • Water soluble
    • 0% 0°C
    Product data sheet

    Anti-Dust

    Description

    Ready-to-use, water-borne dust-binding agent.

    Product features

    Dust-binding of untreated rock material surfaces. Anti-Dust penetrates well into the pores of the substrate. Does not form a film-like surface or alter the original color of the surface.

    Recommended uses

    Concrete, plaster, filler and tile surfaces and most common mineral plates on wall and ceiling surfaces in dry interior spaces. Also suitable for the treatment of concrete floors and exterior spaces that are protected from the strain caused by weather conditions.
    230

    Technical Information

    • Product Drying Time Non-stickable 1 h
    • Product Intended Areas For Use: Floor IAW3
    • Water soluble
    • 0% 0°C
    ProductPage/CanSizes
    5,0 L
    Coverage
    4–8 m²/l. The roughness and porosity of the surface to be treated affect the coverage.
    Medium
    Waterborne
    ProductPage/ApplicationMethod
    The recommended application method is by low pressure spraying (“knapsack sprayer”). Can also be applied with a brush, roller or spatula.
    Storing And Transportation
    Protect from frost and direct sunlight., Badly closed or short cans endure badly long-time storage., Close can carefully for next use.
    Product data sheet and Safety data sheet